Boats / RVs / Industrial / Manufacturing / Construction / Special Projects
TK Water Sports Introduces shrink wrap service. Shrink wrap your boat wrap it up right with Mr. Shrink wrap we are the guys who do it right. minimize you winter damage, save on spring maintenance and prep for summer use.
TK Watersports offers Shrink wrapping services
Shrink wrap your boat and add that extra layer of protection to your boat as part of your winteriztion process. By properly shrink wrapping your boat it can last for years providing water proof and UV protection for you watercraft, vehicle, machinery or personal valuable and property.
What is Shrink Wrap?
Shrink wrap is a ployethylene film that is used to cover the object or vessel shrunken tight creating a protective covering of skin from snow, ice, debris and nesting animals. Shink Wrap comes in number of sizes and thickness depending on what is needed for the application and duration of protetion that will be needed
In Utah
.
SHRINK WRAP Save on large storage cost, don't let the winter get the best of you
Don't have a garage??? Don’t need one. Store your boat safely outside, Potect from mildew, no monthly indoor storage fee's, keep nesting animals out
UTAH
Shrink-wrap your boat for periods of long winter storage
During these long periods of storage you uncovered boat is susceptible to damage from a number os sources rain, snow, blowing dirt and debris, bird drippings, UV radiation and nesting birds or rodents. While conventional coveror tarop offers some shelter from the elements, only a shrink-wrap cover gives your boat protection that's 100% waterproof, impossible to blow off and can withstand heavy loads of snow or rain..
Shrinks wrap also protects from the pollution and industrial fall out that can be in the air and settle causing damage to gel coat. Detail your boat before storage and bring it out in the spring ready to go by adding a skin of shrink wrap
Let TK Watersports come detail your boat and shrink wrap it clean and ready for use in the spring. In the springs take the film off dewinerize the engine and your ready to go
How is Shrink wrap done?
BOAT IS PREPPED
The process begins by prepping the boat by creating a frame or support structure acting as a skeleton that the film can be shrink wrapped to. This is done by using support poles and in some cases using the existing structure such as a tower on a wakeboard boat. Strapping lines are run from bow to stern and port to starboard completing the frame. A belly line is ran with a number of support lines that creates a cage or to complete the frame for the shrink wrap film.
The shrink wrap is sized and custom fitted to your boat. This shrink wrap film is pulled over and draped over the frame of the boat that we have created and secured to the belly line. This is done by folding the ends around the belly line and welding with heat creating a snug fit around the boat.
The belly line is tied down so that when heated the film won’t lift out of place. The film is completely heatedand forms tightly around the skeleton or frame that was created.
Ventilation is the final step along with taping up all the seams and any holes etc.
What does it cost?
Most Boats up to 24ft $14 per ft waverunners Jet Skis $150 flat
Boats up to 28ft $15 per ft Boats over 28 ft $16 per ft
For special projects machinary, trailers etc call for estimate
Call for you free estimate 801-367-0668
Mr Shrink Wrap will take extra care in doing it right
What we do extra to make us stand out from the crowd
